水刀,水切割機,鋁材切割

設備配置/equipment disposition
型號/model：jdw380-b2030橋式數控切割平臺/2030 bridge-arm work table of the cnc water jet
結構形式/stucre：橋式/bridge 
切割范圍（x*y）/cutscope（x*y）：2000mm*3000mm
x軸行程/travel of x axis：2000mm
y軸行程/travel of y axis：3000mm
z軸行程/travel of z axis：200mm
cnc控制系統/cnc coolling system：交流伺服系統/ac servo
system
切割精度/cutting accuracy：±0.1mm
重復定位精度/repeatability accuracy：±0.05mm
電源/power supply：380v/ac,50hz/60hz
z軸電動控制升降/motorixed z axis
奈凱cnc控制系統/naiky cnc cool system
日本三菱交流伺服電機、驅動器/mitsubishi ac servo motor and
driver(japan)
超高壓系統/high pressure pump
jdw380mpa超高壓發生器/jdw380mpa high pressure generator
壓力/max .pressure:400mpa
增壓比/lntensifier ratio: 24:1
排水量/flow rate: 5l/min
進水壓力/lnlet wateor pressure: 0.4mpa
油泵排量/max.pump outflow: 80l/min
油泵壓力/max.pump pressure: 31.5mpa
油箱容量/volume of oiltank:260l
主電機功率/main motor power: 37kw
電源/power supply: 240v/380v/415v/50hz/60hz
一體化磨料切割頭/abrasive cutting head
寶石尺寸/max oriflce size: 0.33mm
砂管直徑/max nozzle: 0.76mm
高壓水開關/high-pressured water switch
氣動閥門，可以實現高壓水的瞬間開啟和關閉/air-drivng valve with a function of the instant on/off the hi-pressure water
通過nc輔助功能實現自動控制/the auto coolling over the on/off pressure water can be achieve by ncn function